Future Technologies

LED and laser light for small cross-sections of LEDs have opened up many areas in recent years because of its longevity and its energy efficiency at simultaneous color fidelity and often replaced incandescent and discharge lamps in traditional fields of application. For the coupling in small fibre cross sections were the usual semiconductor-based solutions but usually no equivalent substitute. Now this however has changed. High-performance laser diodes now advancing in areas previously reserved Xenon discharge lamps. Medical technology, life science, and endoscopy will benefit. Since the Volpi AG (www.volpi.ch) brought the first white LED light sources on the market about 15 years ago, the Swiss company has promoted continuously, and with considerable success the development work. Now the lighting specialists have set a further milestone: in close cooperation with users up to 700 m developed new LED and laser-based high-performance light modules for the coupling in fiber cross section of 125. With their high The new solution offers a maintenance-free, energy-saving, long-lasting and color-accurate alternative to xenon lamps light services.

So is the light performance of very compact compared to Xenon types module at the end of a 0.7 m long and 200 m thin fiber, for example, considerable 30 lm. foundations for the new formed in addition to LEDs with high power density and low-cost laser above all the experience in the design of optical input power systems and a sophisticated thermal management. The new fiber lighting creates favourable conditions for many new standard products and customer specific solutions. These include E.g. endoscopes for minimally invasive surgery as well as systems for ophthalmology, wave front measurement or the whole life – science and Diagnostics area. Further performance increases are foreseen; on future developments it will be so excited.

Volker Schuster

The customer decides on the look of the film on the surface. It is based on the desired colors, designs and symbols. The design and the functionality is determined”, Volker Schuster makes clear. The printing of the film according to the layout requirements of customers is carried out in a special printing process. For example, products are up-to-date in the trend, with a Verschwindeeffekt”are provided. Control icons are only visible if they are backlit. A technique that is used primarily in the automotive industry.

More printing steps. The ambient temperature is decisive for the quality of the product. Basically, consistent climatic conditions must prevail in all production areas. The application of conductive and non-conductive layers following the printing of the motifs. This is the heart of the development. he topic.. Here is the ultimate Know-how. These layers are the functional technique in the entire product structure.

After printing the film visually resembles of a roadmap in a subway network, with many traces that are integrated into the slide and in the later application is fully conductive. This new technology eliminates the conventional technology necessary sensors, which caught, back attached to the plastic product as individual parts or on a printed circuit board together. That leads to a reduction of the items in the sequence. To relieve the film residue of solvents from the printing process, all inserted printed slides with a large kiln cars in an annealing oven. The slides are pre-punched in the next production step. For the dimensional accuracy a vitally important step. A pressure defined for the slide in relation to punching offset is precisely maintained by camera-monitored cutting cycles. Then, the foil is punched. Also this edit station reach modern digital camera technology. In the deformation the expertise developed by the Schuster Group for the functional layer is now the slide. The deformation process is carried out with high pressure technology.

GUV Test

For this reason, the specified test periods are rather guidelines, which are influenced by various factors and changed. Fixed electrical equipment fixed firefighting resources are firmly tied to their site. They can be easily moved due to missing carrying devices, their high mass, or due to a mechanical fastening. Also only temporarily attached to a place and flexible cables-powered devices include the stationary equipment. Resources are often part of electrical equipment, such as motors, lamps, etc. Fixed electrical equipment are, for example, electric cookers, refrigerators, stand drills, outlets, cabinets or Hot-water tank. Fixed electrical equipment should be tested every four years. Here, too, it is possible that a periodic inspection of fixed electrical equipment can replace a constant monitoring and maintenance, as well as certain technical measures.

The electrician is responsible for the maintenance. Stationary stationary plants are firmly connected to their environment. Examples of stationary plants are construction trucks, container, compressor units and installations in buildings. Non-stationary equipment are not stationary at the place where she are needed be built and dismantled after use. Non-stationary plants are for example so-called temporary buildings and facilities construction and mounting locations. What kind of electric it is equipment or electrical equipment, the safe and proper condition and compliance with the electrotechnical regulations must be ensured. This is not the case, so defects or malfunctions are detected been for the employers or contractors ensuring that the electrical equipment is repaired. A risk from the failed system, a ban on the use must be pronounced and made it clear to the system.

Test report for regular checks on each test on electrical equipment or resources, detailed records should be made. Depending on the requirements suitable for normal sheets of paper, a check book, flashcards, or digital file. A storage of data at least until the next check is recommended, in order to assess the condition of the plant based on comparison values. The test report should contain the following information on the audited system: details about plant parts accurately recording of the visit results of the tests and measurements possible deviations error, damage, deterioration, hazardous conditions recommendations for repairs and improvements recommendations for the amount of time the next inspection date marking of electrical Resources and systems electrical systems and resources, although tested by a qualified electrician happened but mostly daily by other employees dealing with the devices. So that they, too, about the current condition and performance in the picture are the application of inspection stickers has proven itself. On the basis of a corresponding test badge the user know when the plant or the resources were last checked and when the next inspection date is. The certification label of next test date GUV-V A3 “you get in the brewes online shop.

Internet Of Things: Between Blah-tsunami And Meaningful Applications

Logistics industry benefits from products with intelligent memory Saarbrucken/Hanover, Germany, March 18, 2009 – a consortium under the leadership of the German Research Center for artificial intelligence is committed to the task, to develop products with memory. The project is called semantic product memory\”(SemProM). The researchers describe some scenarios where writing diary products could be used, forget about a shopping Assistant for an old lady, who is a little scatterbrained and sometimes something. Merk-enabled things to remedy this. If Grandma doesn’t remember what she wanted, her clever Rollator will meet future purchasing decisions. Products should know soon, she owns and what they all have experienced in this way for example, product pirates to confront’, so technology review blogger Peter Glaser.

The desolate touch of inorganic, under which most objects had to suffer so far might be different a kind of intelligence, the us as a new,. diverse useful micro-machine environment to surround. This touches me a notion of murmuring box rows at the supermarket, communicates a noise like a well-stocked restaurant, in between a few judicious dowels in the electrical Department is already too much me. \”Now things should be capable of expressing and I mean not just a peeping sensor I see to flood a blah tsunami on us\”, Gandhi feared. The logistical advantages of the Internet of things are indisputable, because companies can only manage what you can measure also. This principle simple in principle presents itself often in practice as a problem. If is about a retailer not in the position to measure the level of its shelves, then he won’t be able, to increase the availability of its merchandise in the store: so lose up to eight percent of sales by so-called out-of-stock situations (OOS). With the RFID wireless technology get first information systems Eyes\”and ears\” and ability to the low cost measurement of their environment.