Manufacturing technology of modern windows can produce almost any design. Wooden windows can be straight or curved, have any form. There is only one limitation: the angle between the two parties to the window frame should not be less than 30 degrees. The minimum value of the window is 30 cm in length and width. The smaller size is not valid because the thickness of the frame itself.

If we talk about maximum limits, then there defining factor is the functionality of the opening. For example, if we are talking about the section, which should be open or swing open, the length of the leaf should not exceed the meter. This is due to the fact that the glass has a higher density than plastic, respectively, it is much harder. Along with the size increases, and its weight, which can lead to skewed frames. For the deaf section size is limited to an area of glass, which operates the manufacturer.

However, the large glass leads to another problem – loss of heat, for industrial buildings is unacceptable. The main objective of these windows is to create a comfortable atmosphere for work. They are needed in order to reduce energy consumption for lighting the room, but consider the fact that regular glass has excellent thermal conductivity. It does not matter what kind of product you produce. Food, wood windows, equipment – all this requires a certain temperature. To solve this problem have developed special energy-saving glass. Their work is based on the fact that the surface of the window cover special selective composition. Such a fine glass transmits visible to humans sunlight, but prevents the exit from the manufacturing premises of invisible heat rays. Faced with the surface, they simply reflected back, which significantly reduces energy consumption for heating. The simplest eurowinows glass consists of two panes and allows you to reduce the loss of heat in the room compared with traditional double glazed windows to 30-40% and reduce the noise level in half to two times.