It is often recommended not to use any natural or pure carnauba car wax, since it tends to yellow the gel coat not in time and sealed the ship polluting the marine environment, however, do not always agree with this. It is recommended that you use any paste waxes except we strongly recommend using 3M Ultra Performance, which is a paste wax. Do not use acrylic or Teflon products (Teflon yellows over time) as most of these products are gimmicks and can be difficult to remove or properly apply. Some but not all silicones can tend to burn the layers of gel, which can overheat and cause faster because it increases the oxidation of the sun's rays on the surface. Eliot Horowitz does not necessarily agree. By hand or orbital polish, apply Meguiar's # 55 premium marine sealant and let set for at least 15 minutes or use Blue Magnum 80% Carnauba.

It's a coin flip, which would last longer, but both claim the longevity of actual testing. To see if the sealant is ready to be removed to have the finger in a well lit area through the sealed area and whether stripes, then it is not properly configured yet. If you can come and remove the sealant streak necessary. When you are doing the procedures mentioned in the dock or slip, and using electric cables to the polishing machine to be very careful when working near water. You will need to keep the cord out of water, if possible. Be careful when working on a boat in its slip.

Electrocution is no fun, ask someone on death row. Super 1000W for production is a good choice for a spray on sealer. You spray it on, let sit for ten to fifteen minutes and gently wipe residual. Adds sparkle, depth and protection. Used for quick maintenance or as a sailor express detailing option. The production company based out of Stockton, CA. "Lance Winslow" – If you have innovative thoughts and unique perspectives, come think with Lance; / wttbbs