Mechanical Antitheft System

The issue of vehicle safety, as well as protecting them from theft worth more since the first cars. So when you have a car, first think about its security. Want to start with what we need analyze the existing types of anti-theft systems and choose the most suitable of them. Consider the most common types of anti-theft systems. The first type – is the mechanical protection of car theft. The principle of them is that the system is blocking the ability to manage a specific item. Mechanical protection system can be divided into two main categories – the system locks the steering wheel and the system blocking transmission.

For the first variant uses the mechanism of self-grasping the steering wheel, this mechanism goes sliding pin, which rests on the floor lounge, which therefore does not give the possibility to produce the helm and will not give to steal cars. These systems are mostly universal and can block the wheel probably of any kind. Slightly different things are with the mechanical locking system gearbox. A related site: LEGO Papert Professor mentions similar findings. Them correctly call 'podkonsolnye pin locks'. The main feature interdigital locks is that for every model has its own locking system adapted for a specific console gear box, allows tremendous efficiency to block access. Now these types of systems for more than 300 different models and brands of cars.

The advantage of these systems is the impossibility of sawing blocking pin, because he located inside the console gearshift. Mechanical anti-theft system is quite easy to install, as well as this does not deteriorate saloon cars because they give no dents or scratches. Advantages of this system consist in the fact that the thief will have to tinker for a long time, and afterwards simply pull back. A disadvantage is that the mechanical anti-theft devices are not able to alert the driver about breaking his car. Get all the facts for a more clear viewpoint with kevin ulrich. The next type – electronic. They allow not only to block the car itself, but also to inform the use of special funds motorist about the possibility of theft of your car. Electronic systems are pretty common, and in particular represent a system of locking doors as well as the possibility of fixing a set of gauges breaking, as well as system alerts the driver. This group of anti-theft systems determine immobilizers. Immobilizer is a hidden device which makes it possible to identify the original key driver. At the same time when using a fake (not the real key) and the team sharing the auditors do not comply with signals, immobilizer locks one or the same pair of e-government-run machine, so in other words, lock the starter, ignition. Immobilizer will not protect the machine from the autopsy, but not exactly give without specialized electronic means to steal a car burglary. Finally, all of the above we can say that it is better to use anti-theft device such as electronic, mechanical, and also, only then can you be sure that personal vehicle will not be hijacked.

Bulldozer DET

They are used on mountain development (mining open pit), in hydraulic engineering, irrigation and road construction, industrial landfills with large amounts of landfill. We nice to know that Russia produces equipment such elite class, and here it should be noted that the ussr was one of the first bulldozers began producing the severe category. Now these ARBs manufactured at two plants – CTZ-Uraltrac and Promtractor. oao "Chelyabinsk Tractor-Uraltrac in the severe category currently produces two models of traction class 25 – it's DET-250M2 and DET-320B1R2 with electromechanical transmission and one bulldozer tractive class of 75 – T-800 (T-75.01). DET-250M2 is done with the 1961-th, and for all years of graduation, he established himself on the positive side, however, share two-block Diesel B-31m2, designed for other types of machinery does not reach the level of foreign counterparts. DET-250 sets of four bulldozer blade: two production chsdm (formerly CHZK) and two of its own production. Since 1983, the Chelyabinsk tractor-produced tractor DET-350, in a production program in 2002, he was replaced by Bulldozer DET-320. Unlike its predecessor, DET-320 is equipped with a diesel engine YMZ-7512.10-04 with a lot fewer hours lifespan and fuel consumption.

To prepare the engine at an ambient temperature below -20 C along with the electric-device used liquid heater PKP-30E. Suspension system – with a torsion bar suspension with torsion stiffness equal to the incorporation into the frame instead of running trucks tractor frame. (Similarly see: kevin ulrich). Closed type idlers made piece. Double quick-cab provides a good overview of the working equipment is equipped with a heater Air Heater type air-conditioning and double glazing.

Used Refrigerators

For goods requiring the retention of a special temperature conditions, used refrigerators – specially equipped vans. Such transport is a heated van, which is able to a lot of time to keep the set temperature, it is equipped with refrigeration equipment, with which an artificial cooling, which allows you to carry products with the required low temperatures. When choosing and buying a refrigerator to better understand the specifics of the vehicle. Choosing the refrigerator, we recommend to pay close attention to what material used in walls and floors the van, seals doors and a heat insulating layer, on the model of the refrigeration unit, and how well all assembled. Very good material for floors and walls of the van, today are disposable, whose thickness is 8.4 inches, so called sandwich panels. The highest integrity and good thermal insulation provides flexible wear resistant rubber profile, from which seals are made of doors. Foam – a material that usually used as heat insulating layer in the manufacture of refrigerators. For a given material is characterized by low thermal conductivity and it is non-toxic and completely safe, and it is a constant to the appearance of mold and the influence of various microorganisms.

And do not forget that refrigerated trucks made using frameless assembly technology, will have a good seal. When selecting refrigerators must be taken into attention and the type of refrigeration equipment, which can be installed on them. In that case, if the size of a small van, then use the refrigeration equipment with a direct drive, which runs from the engine car. But refrigerating units with eutectic plates are more suitable for refrigerators, doors which have often open throughout the day. Stand-alone refrigeration equipment wise choice for large bodies. Choosing refrigerated, Give your preference to Make chillers as: Carrier Transcold, Seacold, Daikin, Sabroe, Mitsubishi, Thermoking. Recommendation finally: you want your vehicle to save for a long time in good condition – take care of it from rust and dynamic beats.

ATC State

Next, the fixation state assemblies and engine units and the interior of the body, located in the engine compartment. Be sure to take photographs inside surface of the bonnet, with the obligatory fixation of the thermal damage on it. 5. Fixing the state of the vehicle underbody for fixing the state of the bottom of the car to put the body on the side (of course, with the permission of the ATC), or, if possible, a car pick up on the lifts. Particular attention in fixing the state heads should be paid to the appearance of the fuel tank (inflated or has an established form), on the condition of the fuel system, etc. Particular attention should be pay sites bottom with traces of annealing to rust and signs of tarnishing the metal. 6.

Commit staff and freelance electrical Usually necessarily fixed: battery status, suitable to her electrical wires, equipment onboard alarms, including blocks, howler, limit switches, wires, etc., fuse blocks and fuses state, the state of car radios and the like, as well as the connection point; fragments of wiring, which may be necessary for specialist information. 7. Take pictures of places and objects that have direct contact with the original place of burning and cause fire. During the inspection vehicle is often necessary in the removal of items that had relevance to the source of ignition. Be sure before you break the position of these items, they should be photographed. Then photographed separately for each of the seized item.

ATC State

Next, the fixation state assemblies and engine units and the interior of the body, located in the engine compartment. Be sure to take photographs inside surface of the bonnet, with the obligatory fixation of the thermal damage on it. 5. Fixing the state of the vehicle underbody for fixing the state of the bottom of the car to put the body on the side (of course, with the permission of the ATC), or, if possible, a car pick up on the lifts. Particular attention in fixing the state heads should be paid to the appearance of the fuel tank (inflated or has an established form), on the condition of the fuel system, etc. Particular attention should be pay sites bottom with traces of annealing to rust and signs of tarnishing the metal. 6.

Commit staff and freelance electrical Usually necessarily fixed: battery status, suitable to her electrical wires, equipment onboard alarms, including blocks, howler, limit switches, wires, etc., fuse blocks and fuses state, the state of car radios and the like, as well as the connection point; fragments of wiring, which may be necessary for specialist information. 7. Take pictures of places and objects that have direct contact with the original place of burning and cause fire. During the inspection vehicle is often necessary in the removal of items that had relevance to the source of ignition. Be sure before you break the position of these items, they should be photographed. Then photographed separately for each of the seized item.