The customer decides on the look of the film on the surface. It is based on the desired colors, designs and symbols. The design and the functionality is determined”, Volker Schuster makes clear. The printing of the film according to the layout requirements of customers is carried out in a special printing process. For example, products are up-to-date in the trend, with a Verschwindeeffekt”are provided. Control icons are only visible if they are backlit. A technique that is used primarily in the automotive industry.
More printing steps. The ambient temperature is decisive for the quality of the product. Basically, consistent climatic conditions must prevail in all production areas. The application of conductive and non-conductive layers following the printing of the motifs. This is the heart of the development. he topic.. Here is the ultimate Know-how. These layers are the functional technique in the entire product structure.
After printing the film visually resembles of a roadmap in a subway network, with many traces that are integrated into the slide and in the later application is fully conductive. This new technology eliminates the conventional technology necessary sensors, which caught, back attached to the plastic product as individual parts or on a printed circuit board together. That leads to a reduction of the items in the sequence. To relieve the film residue of solvents from the printing process, all inserted printed slides with a large kiln cars in an annealing oven. The slides are pre-punched in the next production step. For the dimensional accuracy a vitally important step. A pressure defined for the slide in relation to punching offset is precisely maintained by camera-monitored cutting cycles. Then, the foil is punched. Also this edit station reach modern digital camera technology. In the deformation the expertise developed by the Schuster Group for the functional layer is now the slide. The deformation process is carried out with high pressure technology.