For this reason, the specified test periods are rather guidelines, which are influenced by various factors and changed. Fixed electrical equipment fixed firefighting resources are firmly tied to their site. They can be easily moved due to missing carrying devices, their high mass, or due to a mechanical fastening. Also only temporarily attached to a place and flexible cables-powered devices include the stationary equipment. Resources are often part of electrical equipment, such as motors, lamps, etc. Fixed electrical equipment are, for example, electric cookers, refrigerators, stand drills, outlets, cabinets or Hot-water tank. Fixed electrical equipment should be tested every four years. Here, too, it is possible that a periodic inspection of fixed electrical equipment can replace a constant monitoring and maintenance, as well as certain technical measures.
The electrician is responsible for the maintenance. Stationary stationary plants are firmly connected to their environment. Examples of stationary plants are construction trucks, container, compressor units and installations in buildings. Non-stationary equipment are not stationary at the place where she are needed be built and dismantled after use. Non-stationary plants are for example so-called temporary buildings and facilities construction and mounting locations. What kind of electric it is equipment or electrical equipment, the safe and proper condition and compliance with the electrotechnical regulations must be ensured. This is not the case, so defects or malfunctions are detected been for the employers or contractors ensuring that the electrical equipment is repaired. A risk from the failed system, a ban on the use must be pronounced and made it clear to the system.
Test report for regular checks on each test on electrical equipment or resources, detailed records should be made. Depending on the requirements suitable for normal sheets of paper, a check book, flashcards, or digital file. A storage of data at least until the next check is recommended, in order to assess the condition of the plant based on comparison values. The test report should contain the following information on the audited system: details about plant parts accurately recording of the visit results of the tests and measurements possible deviations error, damage, deterioration, hazardous conditions recommendations for repairs and improvements recommendations for the amount of time the next inspection date marking of electrical Resources and systems electrical systems and resources, although tested by a qualified electrician happened but mostly daily by other employees dealing with the devices. So that they, too, about the current condition and performance in the picture are the application of inspection stickers has proven itself. On the basis of a corresponding test badge the user know when the plant or the resources were last checked and when the next inspection date is. The certification label of next test date GUV-V A3 “you get in the brewes online shop.